Aztech ADSL2+ Ethernet Router Guide de l'utilisateur télécharger pdf (Page 48)

ADSL2+ Ethernet USB Combo Router - User Guide

Page 48 of 67

4.5.19.4

Ingress Static Configuration

The Ingress - Static page enables you to configure a static CoS for all packets received on a

WAN or LAN interface.

Figure 1-34 : Ingress Static Configuration

To configure, follow the following procedure to configure Ingress static QoS settings.

Ingress Static Configuration

1. At the Interface drop-down box, select USB.

You are configuring QoS on this interface only. Any WAN/LAN interface that isnot

configured has the default Untrusted mode.

2. Select CoS1 in Class of Service.

All incoming traffic from the USB interface receives CoS1, the highest priority.

3. Click Apply to temporarily activate the settings.

Note—The changes take effect when you click Apply; however, if the router configuration

is not saved, these changes will be lost upon reboot.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 66 67

Pas de commentaire

Aztech ADSL2+ Ethernet Router Guide de l'utilisateur Page 48