Aztech HomePlug Turbo Manuel d'utilisateur télécharger pdf (Page 12)

User Manual

Page 12 of 42

To create a Secured HomePlug AV network using Simple Connect:

Step 1

Plug your HomePlug AVs side by side where you can easily observe the LED behavior.

Upon connection, the LEDs will blink simultaneously and then the Power LED lights on

steadily.

Press the Simple Connect button of the HomePlug AV X for ten seconds. All LED will blink

indicating that the Private Network Name has been randomize.

Press the Simple Connect button of the HomePlug AV Y for ten seconds. All LED will blink

indicating that the Private Network Name has been randomize.

Step 2

Press Simple Connect for two seconds on HomePlug X. After you release the button, the

Power LED will blink. If the Power LED did not blink, press Simple Connect again for

two seconds.

Note:

Note:Note:

Note: Do not press Simple Connect for more than 2 seconds.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Pas de commentaire

Aztech HomePlug Turbo Manuel d'utilisateur Page 12