Aztech HomePlug Turbo Manuel d'utilisateur télécharger pdf (Page 9)

User Manual

Page 9 of 42

Pairing the Device

Your HomePlug AV devices by default are preconfigured to have a common Private

Network Name. Setting up your HomePlugAV network is as easy as 1,2 and 3.

1. Plug in your HomePlugAV devices side by side to easily observe the LED behavior.

Wait until the Power and PL-ACT LED turns ON to confirm that the connection has

been established.

2. In Room A plug in your HomePlugAV X into the wall socket then connect it to your

Modem/Router’s Ethernet LAN port using an Ethernet cable.

3. In Room B plug in your HomePlugAV into the wall socket then connect it to your

computer’s Ethernet Port. Your HomePlugAV is now ready to use.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Pas de commentaire

Aztech HomePlug Turbo Manuel d'utilisateur Page 9